Description
Geekvape Zeus Coil Range
The Geekvape Zeus Z vape coils are designed for use with the Geekvape Zeus vape tank and Z Fli Sub Tank . These coils are available in 0.4 Ohm (Z1), 0.15 Ohm, 0.25 Ohm or 0.2 Ohm (Z2) the Z-series coils are designed to deliver a longer lifespan as well as a more consistent vape. Now a new & improved mesh version of the coil called the Z XM coil. Z Coils and Z XM Coils Recommended Wattages: Z0.25 mesh- 0.25ohm – ka1- Recommended wattage 45 – 57 watts
Z0.4 mesh- 0.4ohm – ka1 – Recommended wattage 50 – 60 watts
Z0.4 mesh XM – 0.15ohm ka1 – Recommended wattage 50 – 60 watts
Z0.15 mesh – 0.15ohm – ka1 – Recommended wattage 80 – 90 watts
Z0.15 mesh XM – 0.15ohm – ka1- Recommended wattage 70 – 85 watts
Z0.2 mesh- 0.2ohm – ka1 – Recommended wattage 70 – 80 watts Please use recommended maximum wattages as a guide only Length of draw, how hard you draw and thickness of liquid are all things that can determine if the coil will take those wattages. If you are getting dry hits or burning coils quickly either turn it down or change to another coil to see if the experience improves Notes on Priming Z Coils Always prime your coils well when using for the first time
Add 6 or so drops to the coil itself saturating the cotton wick from the inside
Reassemble the tank making sure the coil is secured in place by lining up the lugs on the coil with the notch on the tank.
Add your chosen e-liquid to the tank
Take 5 long drags on your device without powering the coil to start the wicking process. If the tank is gurgling and spitting liquid in your mouth its more than ready and it will take a drag or 2 to vape through the excess.
To be absolutely sure leave rested upright for a minute or so
Start the wattage low and work your way up until you are happy with the experience. If at any time you taste no flavour or worse burnt then stop powering the coil and take a few drags to replenish the liquid in the wick Turn down the wattage a little to fine tune the coil to keep up with the way you vape.
