Description
The HorizonTech Falcon Series Replacement Coils for the Falcon, Falcon King, and Falcon Legend sub ohm tanks. Each pack contains three replacement coils with either vertical round wire or mesh cores, and use a combination of organic cotton with wood pulp, or a flax paper and flax fibre “liquid guiding system” for optimal wicking. Coil Specifications: HorizonTech Falcon Coil Family Vertical Coil Orientation M1 Falcon Coil 0.15 Ohm
Mesh Coils
Liquid Guiding Element 30% Wood Pulp 70% Cotton 70W M1+ Falcon Coil 0.16 Ohm
Mesh Coils
Liquid Guiding Element Bamboo Fibre 75W M2 Falcon Coil 0.16 Ohm
Mesh Coils
Liquid Guiding Element 70% Cotton 30% Wood Pulp 70-80W M6 Falcon Coil 0.15 Ohm
6x Parallel Mesh
Liquid Guiding Element Bamboo Pulp Cotton 65-70W M8 Falcon Coil 0.15 Ohm
8x Parallel Mesh
Liquid Guiding Element Bamboo Pulp Cotton 65-70W Package Contents: 3 x Horizontech Falcon Series Replacement Coils Warning: These coils are sub-ohm resistance. These coils should only be used by experienced users. Extra safety precautions should be practised when using a sub ohm tank. These coils will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you’re using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email. Please Note: This product is not covered under warranty and can not be exchanged.
