Description
Chamber screens for the Tempest 2 V2 with adjustable capacity The depth to which you press the screen into the chamber sets the size of the load: 0.1, 0.15 or 0.2 g of herb. The same plate holds the herb above the bed of balls and lets air through. The balls in the head are kept in place by a separate head screen. Three capacities: 0.1, 0.15 or 0.2 g of herb Job: holds the herb above the heating balls Fitting: pressed in with the tube from the device kit In the set: 3 stainless steel pieces Microdosing or a full load: how to set the chamber The deeper you seat the screen, the less herb goes into the chamber. The position closest to the balls gives microdosing at 0.1 g, the highest one a full load of 0.2 g. Moving it takes the tube and some poking from the neck side, so the chamber tends to be set once to suit your style. The weights are nominal, because the herb should lie loose. Tempest 2 chamber screen specification Material Stainless steel Chamber capacities 0.1 / 0.15 / 0.2 g Fitting Pressed in with the tube to the chosen depth Position Base of the herb chamber In the set 3 pieces Frequently asked questions about the chamber screens How do you change the chamber capacity in the Tempest 2? Press the screen in with the tube from the kit to the chosen depth. The closer to the balls, the smaller the load. How much herb does the Tempest 2 chamber hold? Nominally 0.1, 0.15 or 0.2 g, depending on the screen position. Loosely poured herb settles a little lower. Can the chamber screen replace the head screen? No. The heating balls are held in the head by the head screen: a different size, a different place, a snap-in fitting. When should the chamber screen be replaced? When it clogs or deforms and the draw becomes uneven. The thin plate bends easily during cleaning. Matching parts for the Tempest 2 MAD Heaters Tempest 2 vaporizer Screens for the Tempest 2 head MAD Heaters synthetic ruby balls
